Helicopter Training Set
The training set can be used on both the 4 channel and 6 channel Honeybee models. Its purpose is to stabalise the helicopter to protect the main blades from damage while the user is learning to lift off or hover.
In the pack you will find 4 small skid set connector clips, these connectors attach to the thickest ends of the skid set (fig. 1). You should have one connector on each end of the skid set.
The next step is to feed the bar that holds the orange plastic ball through either one of the two holes on the skid set connector. There is one bar for each connector and all of them will meet together in the middle.
Finally the black circular piece left in your pack holds the 4 bars together securely in the centre of the skid set (fig. 2).