Radio Controlled Jet - Rafale Combat Fighter 4Ch RTF Ducted Fan Rc Jet

Product
Info

Your
Videos

Your
Pictures

Customer
Reviews

Buy

DESCRIPTION

Rafale Combat Fighter 4Ch RTF Ducted Fan Rc Jet

The Rafale was developed by Dassault-Breguet for the Armée de l'Air. The Dassault Rafale, when released into operational service in the late 1990's, was the pinnacle of French aircraft engineering. The system incorporated the latest in fly-by-wire technology, composite materials and aerodynamic design to compliment the broad array of roles required of any fighter in any military force.

The Dassault Rafale was already on the drawing boards even as the Dassault Mirage 2000 was being designed and produced. With France initially a part of the Eurofighter Typhoon conglomeration, the Rafale development was put into high gear when France withdrew from the program. The Rafale would become possibly the best Dassault fighter ever produced and step forward as the next generation in French aircraft design.

The real Rafale Jet

Based on its full-scale counterpart, this French jet flight model has a high roll rate and even can do the famous "cobra maneuver" flight. This is an excellent scale model aimed at intermediate to advanced fliers. It is a highly manoeuvrable model that can easily perform inverted flight, loops and rolls etc. It comes pre-painted with everything you need included apart from the normal AA batteries for the transmitter. The model is almost ready to fly out of the box with only very minor assembly required such as attaching the wings. Everything you need to complete is included in the box.

Click below to watch a video of the rc jet in action!

Included is a 2.4Ghz 1000m range transmitter, electronic speed controller, ducted fan with electric brushless motor and 3 electric servos all pre-installed. The 4ch transmitter gives full 3D control of the aileron, elevator, rudder and throttle. The ducted fan system with the brushless motors and li-po battery gives enormous power pushing the jet to speeds of 70 mph. The high power allows full aerobatic characteristics and inside loops, outside loops, axial rolls, inverted flight, knife edge, stall turns, hammerheads, and spins are all possible.

The attention to detail gives the jet a nice realistic appearance. The jet can take off from the ground or can be hand launched. If you are not ready to be flying at 70mph then you can also fly the plane very slowly while you get used to it without any problems. The jet is made from shock resistant EPS foam with reinforced fuselage and strong wings. Should you need any spare parts though they are all available from our site. This plane is a lot of fun and you will certainly enjoy flying this fantastic model.

Specifications:
Wingspan: 660mm
Overall Length: 1000mm
Flying Weight: 610g
Height: 305mm
Wing Area: 5dm²
Drive System: Ducted Fan
Motor: Inrunner Brushless
Servo: 3 X 9g high speed micro servos
Speed Controller: 30 Amp Brushless
Battery: 11.1V 1300mah Li-Polymer
Control system: 4 CH 2.4Ghz Radio Transmitter and Micro Receiver

Features:
4 Channel Digital Proportional
Upgraded 2.4G Radio System
Full aerobatic characteristics
Flying speed of 70mph
Brushless setup
Turning front-wheel
Ready to fly in just minutes
Super tough, lightweight airframe
Perfect appearance and emulation
Take off from ground or hand launched
Excellent flight performance
Stable inverted flight
One of the best looking jets in the market
Slow speed flying capable
Apr. 10 min's flight time per charge
High roll rate

PICTURES

YOUR VIDEOS

Have your product video featured on the site! Each month we give away £100 in Nitrotek credit to the sender of our favourite video!

YOUR PHOTOS

Have your product photo featured on the site!

FREE Next working day delivery (If order received before 1pm)