This radio controlled RTF 4 CH 2.4Ghz GuanLi Messerschmitt ME-109 electric brushless WWII 3D plane has a tough, but lightweight airframe and the outer shell is superbly finished, carefully emulating the details of the real thing. This fighter model is incredibly stable and will fly at low speed and low altitude making it simple, safe and fun, even for the beginner.

The Messerschmit's design makes it a brilliant 3D aerobatic performer for the experienced pilot: inside loops, outside loops, axial rolls, inverted flight, knife edge, stall turns, hammerheads, and spins are all possible. It can roll quickly and is super stable even when flying upside down. The wing and body are specially designed to allow high G manoeuvres, however the wing loading is still very low.

The Me-109 has been upgraded with a powerful brushless motor and a 2.4Ghz radio transmitter making it a perfect choice for the enthuiast. We have also upgraded the charger from a standard one to a balanced charger included in the price. This makes charging safer and better for the battery.

As you can see from the pictures this plane has been meticulously created, faithfully reproducing the famous warbird in a manner that does its aeronautical reputation justice. The model can be used within minutes of opening the box as it's 90% assembled for you at the factory. The Me-109 was the best known and most produced German fighter of World War II. It was the backbone of the German fighter command and ruled the skies over Europe from 1939 to 1941 as Hitler spread his empire over the continent. The Me-109s earned the respect of Germany's enemies in every theater of conflict and were greatly feared by Allied bomber crews during the later half of the war.

This ME-109 has been a favorite of R/C modelers for years and is now available as an easy-going ready-to-fly replica that is small enough and quiet enough for flying sorties at your local park or sport field! This plane is described as RTF or ready to fly. This means that everything except batteries for the transmitter is included in the box and that only a few minor stages of assembly remain such as attaching the wings and tailplane. These steps should take around 30 minutes to complete.

• Powerful brushless motor and Li-Po battery
• 4 CH Full RC - Aileron, Elevator, Rudder, Throttle
• 2.4Ghz Radio Equipment
• Rudder helps steer plane on ground
• Full aerobatic characteristics 
• Excellent stability
• Ready to Fly in Just Minutes!
• Super tough
• Lightweight
• Shock Resistant Fuselage
• Strong Wings
• Pre-installed Electronics 
• Suitable for beginners and experts
• Only required 8 AA batteries for the transmitter to start flying

• Wing span: 900mm
• Length: 780mm
• Flying weight: 405g
• Drive: 2410 Brushless Motor 1200KV 
• Speed Controller:20A Brushless ESC
• Servo: 3x10g
• Battery: 11.1V 1000mah 15C LiPo Battery
• Control: 4 CH 2.4Ghz Radio Tx & Rx
• Range: 1000 feet

• 8 x AA Battreries

Have your product video featured on the site! Each month we give away 100 pounds in Nitrotek credit to the sender of our favourite video.

Have your product photo featured on the site!