PRODUCTS
HBX
1:8 NITRO CARS
ACME-TECH
FULLY BUILT NITRO CARS
NITROTEK
FULLY BUILT NITRO CARS
UNBUILT
NITRO CARS
1:5 PETROL CARS
ENTRY
/ INTERMEDIATE
ELECTRIC CARS
INTERMEDIATE
ELECTRIC CARS
TOP
OF THE RANGE
ELECTRIC RC CARS
MINI MONSTERS
ELECTRIC
RC HELICOPTERS
ENTRY LEVEL RC PLANES
4 CH MID RC PLANES
NITRO / ELECTRIC RC BOATS
RC BB TANKS
RC
ROBOTS
MISC.
|
E-Sky Flight Simulator Instructions
Useful info regarding FMS setup after installation:
1. Remove frequency crystal from handset - very important, crsytal
not required and will overheat.
2. Connect serial cable to transmitter and free com port.
3. Turn on handset - battries must be fitted and show ok.
4. Run FMS 2.0 (version 7 beta to 8.5 alpha dependant on OS system
(7 beta has better sorted model shadow graphics, works with windows
ME, 8.3 alpha on work with XP and have wind effects)
5. Once program is loaded and is running select 'Hughes' or 'Threedee'
from 'Model' selection
6. On the 'Control' tab select 'Analog control', then 'resource',
choose 'serial pic' from the list, use 9600 as baud rate and as
appropriate select the com port the cable is plugged into on your
computer.
7. Next to 'Resource' under the control tab is 'Mapping/calibration'
button, click this. To fly the helicopter map the first 4 (rudder,elevator,
aileron, throttle)as channels 5,6,7,8 and the next four tail,nick,roll,pitch
as 3,1,2,4, the first four are for flying planes and the second
four are for helicopters!
8. Click calibrate, following instructions on the screen move sticks
through their full range, centre all sticks inc. throttle and finish.
May have to reverse the throttle action from the transmitter by
flicking the reverse switch on the transmitter. (The program seems
to offer this but
it didn't work).
One other useful thing is under the 'simulation' tab select options
and the tick 'auto initialise'
Don't forget to reset the reversing switch and fit rf module before
using the transmitter with the real helicopter.
|
INFORMATION
COMPANY
INFO
RESOURCES
WHOLESALE
CUSTOMERS
Nitrotek
European Sites
We
are listed on ,
,
,
,
,
and many more.

|