PRODUCTS
HBX
1:8 NITRO CARS
ACME-TECH
FULLY BUILT NITRO CARS
NITROTEK
FULLY BUILT NITRO CARS
UNBUILT
NITRO CARS
1:5 PETROL CARS
ENTRY
/ INTERMEDIATE
ELECTRIC CARS
INTERMEDIATE
ELECTRIC CARS
TOP
OF THE RANGE
ELECTRIC RC CARS
MINI MONSTERS
ELECTRIC
RC HELICOPTERS
ENTRY LEVEL RC PLANES
4 CH MID RC PLANES
NITRO / ELECTRIC RC BOATS
RC BB TANKS
RC
ROBOTS
MISC.
|
Electric Radio Controlled Boat Help.
How to calibrate the ESC before use on the high end
electric boats:
Forward (pull the trigger towards you and prop should
spin) - LED should shine as per the motor speed.
Brake (trigger in the neutral position, prop should now be stationary)
- LED blinks.
Reverse (push the trigger away from you and the propshould spin
in reverse) - LED shines solidly.
Note: the boat when moving in forward motion can not go into reverse
motion immediately. There is brake delay time so the handset will
first need to go into neutral for 0.35 seconds before you begin
reversing.
If you are not experiencing forward motion, reverse motion or both,
first check your trims. If this does not make any difference your
boat may not be calibrated so use the procedure below:
* Handset and boat switched on.
* With the handset in neutral, press and hold the set-up button
for 1 second until the LED blinks once/motor bleeps once. Neutral
set-up is finished.
* Pull the trigger towards you, press and hold the set-up button
for 1 second until the LED blinks twice/motor beeps twice. Forward
set-up is finished.
* Push the trigger away from you, press and hold the set-up button
for 1 second until the LED blinks three times/motor beeps three
times. Reverse set-up is finished.
|
INFORMATION
COMPANY
INFO
RESOURCES
WHOLESALE
CUSTOMERS
Nitrotek
European Sites
We
are listed on ,
,
,
,
,
and many more.

|