PRODUCTS
HBX
1:8 NITRO CARS
ACME-TECH
FULLY BUILT NITRO CARS
NITROTEK
FULLY BUILT NITRO CARS
UNBUILT
NITRO CARS
1:5 PETROL CARS
ENTRY
/ INTERMEDIATE
ELECTRIC CARS
INTERMEDIATE
ELECTRIC CARS
TOP
OF THE RANGE
ELECTRIC RC CARS
MINI MONSTERS
ELECTRIC
RC HELICOPTERS
ENTRY LEVEL RC PLANES
4 CH MID RC PLANES
NITRO / ELECTRIC RC BOATS
RC BB TANKS
RC
ROBOTS
MISC.
|
Calibrating Your ESC (Electronic Speed Control)
The ESC in most cases will have been calibrated before
you receive it. There are ways to check this however if you are
not sure:
Switch on the handset first and then the car. Notice how the LED
reacts as you use the handset so place the car on something which
will allow the wheels to spin freely i.e. tin of paint.
Forward (pull the trigger towards you and wheels should spin forwards)
- LED should shine as per the motor speed.
Brake (trigger in the neutral position, wheels should now be stationary)
- LED blinks.
Reverse (push the trigger away from you and the wheels should spin
in reverse) - LED shines solidly.
Note: the car when moving in forward motion can not go into reverse
motion immediately. There is brake delay time so the handset will
first need to go into neutral for 0.35 seconds before you begin
reversing.
If you are not experiencing forward motion, reverse motion or both,
first check your trims (also on our help page). If this does not
make any difference your car may not be calibrated so use the procedure
below:
* Handset and car switched on.
* With the handset in neutral, press and hold the set-up button
for 1 second until the LED blinks once/motor bleeps once. Neutral
set-up is finished.
* Pull the trigger towards you, press and hold the set-up button
for 1 second until the LED blinks twice/motor beeps twice. Forward
set-up is finished.
* Push the trigger away from you, press and hold the set-up button
for 1 second until the LED blinks three times/motor beeps three
times. Reverse set-up is finished.
|
INFORMATION
COMPANY
INFO
RESOURCES
WHOLESALE
CUSTOMERS
Nitrotek
European Sites
We
are listed on ,
,
,
,
,
and many more.

|