The Conquistador
Special Edition is the top of the range Acme model with many hop ups
installed as standard. With all the aluminium upgrades and performance
enhancing parts the Conquistador becomes a stronger and better performing
model. We have taken a standard Conquistador
and then crammed it with all the best optional parts that if purchased
separately would cost a lot more. Top that of with the visual enhancements
of the blue machined aluminium parts and polished aluminium exhaust
and you have got one awesome looking and performing monster truck.
We have two Conquistador
special editions, one that is built more for speed and one that is built
more for off road. This is the high speed version and therefore includes
a two speed automatic gearbox and racing type tyres. The Monster version
which does not have a 2 speed gearbox but has a bigger ground clearance
due to its over sized tyres can be seen here.
As
well as all the features found on the standard Conquistador this SE
version includes the following:
1. Aluminium upper wishbones
2. Aluminium lower wishbones
3. Aluminium servo saver
4. Aluminium knuckle arms
5. Polish aluminium pipe
6. Hardened steel engine clutch gear
7. Hardened spur gear
8. Two speed gearbox
9. Aluminium shock towers
2ch
CE approved controller |
Like
the standard Conquistador this special edition still comes fully
built with UK radio equipment pre-installed. All that is required
is fuel, glow start (both optional below) and 12 normal aa batteries. |
Click
here to watch a video of the truck in action.
Click
here to watch a video of the truck on a dirt track.


NEW FOR 2008! - Acme Tech models now come with high quality Team Infinity
engines. Team Infinity engines are made in Japan and feature a simplified
carb that makes them the easiest to start and most reliable engines
on the market. Nitro engines usually have two or more tuning needles
but these only have a single adjustment that makes them much easier
to use without sacrificing any power.
| SPECIFICATIONS:
Width: 330MM
Height: 165MM
Track: 267MM
Length: 390MM
Wheel base: 280MM
Gear ratio: 5.69:1 (High), 7.83:1 (Low)
Engine: Team Infinity 18
Wheel dia.: 108*56MM
Ground clearance (F/R): 38MM/46MM |
FEATURES:
Fully Upgraded Special Edition!
1/10 Scale nitro powered car
4WD Shaft drive system
Infinity 18 size pull start engine
Oil-filled Alluminium shocks
Two speed gear box
Front and rear bevel differentials
75CC Fuel tank
Metal disc brake system
Pre-painted and cut body shell
Sealed box for protecting receiver system
High quality 27MHZ CE approved Radio system with changeable crystals. |
|